OKIDATA OKIPAGE 8c Service Manual Download Page 88

Page: 88 / 286

Page: 39

Service Guide - OKIPAGE 8c

Chapter 3 Disassembly

3.3.12 Gear Heat Assy

Remove the cover assy side (R), cover assy OP panel, cover front (R) and the cover rear (L). (See

3.3.8)

Remove the cover CU then unplug all the cables connected to the PX4 PCB and unscrew 3 screws.

(See 3.3.11)

Unplug all the cables connected to the PXF PCB then remove the PX4 PCB. (See 3.3.11) (Be

careful not to damage the connector when unplugging cables connected to the PXF PCB.)

Remove the heat unit assy. (See 3.3.40)

Remove the guide paper eject assy. (See 3.3.3)

Remove the motor fan (80-25). (See 3.3.2)

Remove the 5 screws (1) and detach the cable (2) then remove the guide heat assy (3).

Remove the 2 screws (4) then remove the motor (ID) (5).

Summary of Contents for OKIPAGE 8c






























































































































































































































































Search results

Summary of Contents for OKIPAGE 8c

Reviews:

Brands by name

Popular brands

OKIDATA OKIPAGE 8c, Service Manual

Search results

Summary of Contents for OKIPAGE 8c

Reviews:

Brands by name

Popular brands