manualshive.com logo in svg

OKIDATA OKIPAGE 8c, Service Manual

Share
Download
OKIDATA OKIPAGE 8c Service Manual Download Page 112

Page: 52

Service Guide - OKIPAGE 8c

Chapter 3 Disassembly

3.3.25 Roller Registration, Roller Assy Hopping

Remove the guide paper input assy. (See 3.3.23.)

1.

Remove the bracket hopping motor. (See 3.3.19)

2.

Remove the gear one-way. (See 3.3.20)

3.

Remove the holder gear toner assy. (See 3.3.30)

4.

[Removal of the roller registration]

5. Remove the gear (1) and 2 bushes (2) and 2 bearings (3), then 2 roller registrations (4).

[Removal of the roller assy hopping]

6. Remove the bush (5) and the bearing (6).

7. Remove E-rings (9) of the sub-roller hopping at both sides of hopping roller and then release the lock 
of the roller hopping (7) with the shaft (8) by spreading the claw, then remove the roller hopping from the 
left side by the sliding shaft (8) in the arrow direction. (Be careful not to lose the knock-pin for 
fastening the roller hopping (7), which slisp off together.)

Summary of Contents for OKIPAGE 8c































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands