OKIDATA OKIPAGE 8c, Service Manual

Page: 3 / 286

Table of Contents Page
....3.3.13 Main Motor (A), (B) Assy 40
....3.3.14 Gear One-way (Z30) 41
....3.3.15 Motor Assy Belt 42
....3.3.16 Power Supply Unit, Holder Inlet, Sheet Insulation 43
....3.3.17 Sensor Assy Box Toner 44
....3.3.18 Square-shaped Connector 45
....3.3.19 Motor - Pulse (ID) 46
....3.3.20 One-way Gears 47
....3.3.21 Feeder Unit Front 48
....3.3.22 Manual Feed Hopper Assy 49
....3.3.23 Guide Paper Input Assy 50
....3.3.24 Two Lever Input Sensors, Lever 2nd Feed Sensor 51
....3.3.25 Roller Registration, Roller Assy Hopping 52
....3.3.26 Hopping Roller Assy 53
....3.3.27 PXU PCB/PXM PCB, Lever Resist Sensor 54
....3.3.28 Paper End Lever 55
....3.3.29 PCO PCB (Operator Panel) 56
....3.3.30 Holder Gear Toner Assy 57
....3.3.31 Plate Latch Lever (FD), Spring Latch Lever (FD) 58
....3.3.32 Transfer Belt 59
....3.3.33 High Voltage Power Supply Unit, Bracket HV (BT)
Assy 60
....3.3.34 Eraser Bracket Assy, Eraser Bracket (KCM) Assy 61
....3.3.35 Shaft Link 62
....3.3.36 Contact Bracket (BL-R) Assy, Contact Bracket (CL-R)
Assy 63
....3.3.37 Contact (BL-L) Assy, Contact (CL-L) Assy 64
....3.3.38 Contact SB Assy 65
....3.3.39 PXC PCB 66
....3.3.40 Heat Unit Assy (Fuser unit and oil roller) 67
....3.3.41 Oil Roller Kit 68
....3.3.42 Lever Lock Heat (L)/(R), Guide Side Heat, Spring Lock 69
....3.3.43 PXL PCB 70
....3.3.44 Heat Unit Guide Assy 71
....3.3.45 Holder LED Assy, LED Head 72
4 Adjustments
4. Adjustments 73
4.1 Maintenance Modes and Their Functions 74
....4.1.1 User maintenance mode 75
....4.1.2 System maintenance mode 76
....4.1.3 Engine maintenance mode 77
4.2 Adjustments after Parts Replacement 78
....4.2.1 Confirm the LED head driving time 79