OKIDATA OKIPAGE 20 User Manual Download | Manualshive

Page: 63 / 88

background image

Chapter 9: Problem Solving

E–55

Message:

DUPLEX INPUT JAM

REMOVE THE PAPER

Meaning:

Paper has jammed when entering Duplex Feeder. Remove jammed
paper, then open and close cover.

Message:

DUPLEX INPUT JAM1

REMOVE THE PAPER

Meaning:

Paper has jammed when being fed to reverse roller in Duplex
Feeder. Remove jammed paper, then open and close cover.

Message:

DUPLEX INPUT JAM2

REMOVE THE PAPER

Meaning:

Paper has jammed within the Duplex Feeder. Remove jammed
paper, then open and close cover.

MESSAGE:

DUPLEX INPUT JAM3

REMOVE THE PAPER

Meaning:

Paper has jammed in the Duplex Feeder. Remove jammed paper,
then open and close cover.

Message:

DUPLEX OPEN JAM

REMOVE THE PAPER

Meaning:

Paper jammed as it entered Duplex Feeder. Remove jammed
paper, then open and close cover.

Message:

EEPROM RESETTING

Meaning:

EEPROM resetting to factory defaults. Returns to ON-LINE.

Message:

ERROR

nn

Meaning:

Printer error. Try turning the printer off, then on again. If this
doesn’t clear the error, write down the error number nn and
contact your service provider.

Message:

ERROR CONTROLLER

nn -aaaaaaaa

Meaning:

Controller error. nn = exception code. aaaaaaaa = error address.
Call Technical Support or a Service Center. Power off printer to
clear error. If error continues contact service.

Message:

ERROR HOST I/F

RS232C

Meaning:

Serial interface error. Press RECOVER to continue. Check the
protocol of both the PC and the printer. Resend job.

Message:

ERROR MEMORY

OVERFLOW

Meaning:

Page data exceeds available memory. Press RECOVER to con-
tinue. Adjust RASTER BUFFER, RECEIVE BUFFER, and/or
FONT PROTECT in Menu and resend job.

Message:

ERROR PAPER SIZE

CHECK tttttttt

Meaning:

Incorrect paper size detected for tray tttttttt. Provide correct paper
size in tray. Open and close cover to continue.

Message:

ERROR PRINT

OVERRUN

Meaning:

Data too complex for current RASTER BUFFER Setting. Increase
RASTER BUFFER value and resend job, or add memory. Press
RECOVER to continue.

Message:

ERROR RECEIVE

BUFFER OVERFLOW

Meaning:

Receive buffer overflow. Data was lost. Press RECOVER to
continue. Resend job.

Message:

FLUSHING JOB

Meaning:

Data is being discarded as a result of command received.

«
...
61
62
63
64
65
...
»

Summary of Contents for OKIPAGE 20

























































































Reviews:

No comments

Related manuals for OKIPAGE 20

Brand: Oki Pages: 32

Brand: Oki Pages: 2

Brand: Oki Pages: 96

Brand: Oki Pages: 2

Brand: Oki Pages: 78

Brand: Oki Pages: 2

Brand: Oki Pages: 2

Brand: Oki Pages: 32

Brand: Oki Pages: 52

Brand: Oki Pages: 49

Brand: Oki Pages: 48

Brand: Oki Pages: 161

Brand: Oki Pages: 6

Brand: Oki Pages: 84

Brand: Oki Pages: 51

Brand: Oki Pages: 86

Brand: Oki Pages: 40

Brand: Oki Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands