OKIDATA OKIPAGE 20, User Manual

Page: 52 / 88

E–44 Chapter 8: Maintenance
Replacing the Toner Cartridge (P/N 40468801)
Replace the toner cartridge after TONER LOW displays in the control panel
window. At this point, the printer will print about 100 more sheets, then
display TONER EMPTY and stop printing. Printing will resume when a
new toner cartridge is installed.
To replace the toner cartridge:
1. Press the OPEN button and lift the cover.
2. Pull the grey lock lever toward the front of the printer until it stops.
3. Lift out and discard the used toner cartridge in accordance with local
regulations.
4. Remove the toner cartridge from the foil package and shake it from side
to side a few times to distribute the toner evenly.
5. Carefully peel off the tape from the bottom of the cartridge.
6. Place left end of the toner cartridge into the toner well at an angle,
aligning the recess in the end of the toner cartridge with the tab on the
image drum.
7. Lower the right side of the cartridge, aligning the slot with the ridge in
the image drum.
Recess
Tab