OKIDATA OF2600, Service Manual

Page: 64 / 410

to answer the telephone before the unit switches back to fax mode, modify the
TEL/FAX TIMER PRG.
Okifax 2200: User Function 10
Okifax 2400/2600: Technical Function 64
22. The unit is too loud.
- Adjust the Monitor Volume
Okifax 2200: User Function 05
Okifax 2400/2600: Technical Function 10
- Adjust the Incoming Ring Volume. The volume switch is at the rear of the unit.
- Adjust the Buzzer Volume.
Okifax 2200: User Function 16
Okifax 2400/2600: Technical Function 11
- Change the Key Touch Response.
Okifax 2200: User Function 16 (Buzzer Volume)
Okifax 2400/2600: Technical Function 12
- Change the No Paper Call Feature. (The unit warbles when it is out of paper).
Okifax 2200: User Function 11.
Okifax 2400/2600: Not applicable. Saves to memory.
23. The machine wont program. (Okifax 2200)
- During multiple location polling reception or multiple location memory
transmission, the program menus cannot be accessed. Try again after
the operation is completed.
24. Transmission of a fax has been stopped. The ALARM is on and the document
cannot be removed. (Okifax 2200)
- Press STOP. This deactivates the ALARM.
- Press STOP.
- Remove the document.
25. The fax machine will not allow user operation. (Okifax 2200)
- A department id has been programmed. Enter the four digit department ID, then