43471801TH Rev.1
46 /
Oki Data CONFIDENTIAL
3.3.15 Paper Pan Assy, Roller Assy
(1)
Remove the upper cover.(See. 3.3.4)
(2)
Remove the printer unit.(See. 3.3.6)
(3)
Remove the platen.(See. 3.3.5)
(4)
Remove the sensor cable from the claw on the side frame.
(5)
Turn the right and left claws on the rear beam
1
in the direction of the arrow, and remove
from the side frame.
(6)
While pressing area A as shown below, slide the paper pan Assy. in the direction of the
arrow. Release the six claws of the paper pan Assy
2
. from the lower base and remove
the Assy.
(7)
Align the protrusion of the release shaft
3
with the groove in the paper pan
2
and, while
pushing down both ends of the roller Assy
4
, draw out the release shaft
3
.
(8)
Remove the release spring
5
, front roller
6
, and rear roller
7
from the roller Assy
4
.
(9)
To perform mounting, follow the reverse procedure of removal.
Note:
(1)
Align the portion of the release shaft indicated by the arrow with the V-groove in the
release lever to assemble them.
Sensor cable
Rower base
7
6
6
3
4
4
2
5
5
View A
View A
A