43471801TH Rev.1
55 /
Oki Data CONFIDENTIAL
Item
No.
Specification
Drawing
Adjustment method
4.3
(1) Set cut-sheet
(manual feed) A4-
55 kg paper in
the sheet guide.
(2) Print the test data
from the PC
dedicated to
testing.
(3) Check to confirm
that the 40-line
feed height is
within the
specified range.
(4) If this lies outside
the specified
range, correct as
described below.
Correcting cut-sheet
40-line feed height
C
±
0.5 mm
C
±
1.0mm
C=4.233
×
39=1650.9mm
Move 1.22 mm forward from the reference position.
Move 1.12 mm forward from the reference position.
Move 1.06 mm forward from the reference position.
Move 0.94 mm forward from the reference position.
Move 0.88 mm forward from the reference position.
Move 0.76 mm forward from the reference position.
Move 0.71 mm forward from the reference position.
Move 0.59 mm forward from the reference position.
Move 0.53 mm forward from the reference position.
Move 0.41 mm forward from the reference position.
Move 0.35 mm forward from the reference position.
Move 0.24 mm forward from the reference position.
Move 0.18 mm forward from the reference position.
Move 0.06 mm forward from the reference position.
Reference position
Move 0.06 mm back from the reference position.
Move 0.18 mm back from the reference position.
Move 0.24 mm back from the reference position.
Move 0.35 mm back from the reference position.
Move 0.41 mm back from the reference position.
Move 0.53 mm back from the reference position.
Move 0.59 mm back from the reference position.
Move 0.71 mm back from the reference position.
Move 0.76 mm back from the reference position.
Move 0.88 mm back from the reference position.
Move 0.94 mm back from the reference position.
Move 1.06 mm back from the reference position.
Move 1.12 mm back from the reference position.
Move 1.22 mm back from the reference position.
+14
+13
+12
+11
+10
+9
+8
+7
+6
+5
+4
+3
+2
+1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
-11
-12
-13
-14
Correction
Preset
(1) Turn on power
while holding
down
1
SW.
(2) You will enter
menu mode.
(3) Select a group
while holding
down
1
SW.
(4) Select an item
while holding
down
2
SW.
(5) Press
3
SW to
move the printing
position 1 pitch
from the refer-
ence position.
(When
4
SW and
3
SW are
pressed simulta-
neously, the
position will move
-1 pitch.)
(6)After making the
correction and
while holding
down
4
SW,
press
3
SW and
2
SW simultane-
ously to register
the correction
value in printer
memory.
