209
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
T
User authentication
Overview of No Authentication Print Job Settings
When user authentication is used in print mode, printing is possible only with the
four methods below.
- Printing from the printer driver
- Printing from a MAC driver
- Printing from an HDI driver
- Printing from TerioStation2
Print jobs sent from work stations or environments other than those mentioned
above are all deleted.
By configuring the No Authentication Print Job Settings, you can, for example:
- use print authentication for jobs output from the printer driver, and
- do not use authentication for jobs output from a work station.
When not using authentication, you may decide between printing jobs
immediately (Print immediately) and storing jobs to print them later (Store in the
Printer).
No Authentication Print Job Settings (Disabling Authentication from
Specified Computers)
You can configure the settings so that user authentication is not used only for print
jobs sent from specified host computers.
The computers are specified with their IP addresses.
You can specify up to three computer IP addresses.
1
Press
MENU
.
2
Press
User Authentication Settings
.