manualshive.com logo in svg

Oki Pro8432WT, User Manual, Page: 23 / 128

Share
Download
Oki Pro8432WT User Manual Download Page 23

- 23 -

Preparing Your Printer

1

1.

 

Setup

 

„

Restoring a Printer from the 

Power Saving Mode

To restore the printer from the power save 

mode or the deep sleep mode, press the 

<

POWER SAVE

> button on the operator panel.

Memo

 

●

When the printer receives a print job from a computer or 

other devices, it is restored automatically.

Auto Power Off Function

When a certain period of time elapses after 

printing, this printer will turn off automatically.

Memo

 

●

The factory default setting for time that elapses before the 

printer power turns off automatically is 4 hours.

 

●

For how to change the time that elapses before the 

printer power turns off automatically, refer to 

“Settings for 

Turning Power Off Automatically (Auto Power Off)” P.62

.

Note

 

●

In the factory default setting, the auto power off mode 

is disabled during network connection. To enable the 

auto power off mode during network connection, refer to 

“Settings for Turning Power Off Automatically (Auto Power 

Off)” P.62

.

Installing Options

This section explains how to install options on 

your printer. The following options are available:

 

●

Additional RAM (256 MB or 512 MB)

 

●

16 GB SD memory card kit

 

●

Wireless LAN module

Note

 

●

Be sure to turn off your printer and unplug the AC cord 

and Ethernet or USB cable before installing options. 

Installing options while your printer is turned on may 

damage your printer and options.

Memo

 

●

After installing options, set the option settings with a 

printer driver. Refer to 

“When Adding Options” P.44

.

Installing Additional RAM

Install additional RAM to increase the memory 

capacity of your printer in cases such as if 

memory overflow or the collate print errors occur. 

Your printer supports 256 MB and 512 MB RAM.

Note

 

●

Use only genuine Oki Data products. The performance 

cannot be guaranteed when using other products.

 

●

The static electricity may damage parts. Discharge the 

static electricity from your body by touching grounded 

metallic parts, etc., before work.

Memo

 

●

For banner printing, installing additional memory is 

recommended.

1 

Turn off your printer, and then unplug 

the AC cord and Ethernet or USB cable.

Reference

 

●

“Turning Off the Power” P.22

2 

Open the access cover (1) on the right 

side of a printer.

1

Summary of Contents for Pro8432WT

































































































































Reviews:

No comments