manualshive.com logo in svg

Oki Pro8432WT, User Manual, Page: 17 / 128

Share
Download
Oki Pro8432WT User Manual Download Page 17

- 17 -

Preparing Your Printer

1

1.

 

Setup

●

●

Preparing Your Printer

This section explains how to unpack your printer and how to turn it on and off.

Unpacking

CAUTION

It may cause injury!

 

●

At least two people are needed to lift the printer 

safely because it weighs about 37 Kg.

Note

 

●

Be sure to use the consumables or maintenance units 

provided with this printer at first. Otherwise, the life of the 

consumables or maintenance units may not be displayed 

correctly, or you may not be able to use them later.

 

●

The image drum (the green tube) is very delicate. Handle 

it carefully.

 

●

Do not expose the image drum to direct sunlight or very 

bright interior light (approximately more than 1500 lux). 

Even under the normal interior light, do not leave it for 

more than 5 minutes.

 

●

Packaging and cushioning material are needed if 

transporting the printer. Do not throw them away.

1 

Remove your printer from the box and 

remove all cushioning materials and the 

plastic bag from your printer.

2 

Remove the two strips of protective tape 

(1) at the back of your printer.

1

Installing Consumables

1 

Insert your finger into the recess on 

the right side of the printer and pull the 

front cover open lever (1) to open the 

front cover (2) forward.

Note

 

● Open the front cover gently. If opening rapidly, an MP 

tray may open.

1

2

2 

Press the output tray open button (3) 

and open the output tray (4).

3

4

3 

Take out all four image drums from the 

printer.

Summary of Contents for Pro8432WT

































































































































Reviews:

No comments