manualshive.com logo in svg

Oki POCKET PRINT 6010E, User Manual

Share
Download
Oki POCKET PRINT 6010E User Manual Download Page 15

Har

d

ware Installation

I - 5

Section I - Hardware Installation

OKI OkiLAN 6010e User’s Guide

The OkiLAN 6010e Pocket Print Server enables
Ethernet network users to connect to a printer with a
bidirectional parallel port. The OkiLAN 6010e can be
made to work with any centronics or IEEE-1284 paral-
lel interface printer that includes a resident emulation
such as PCL versions 4 through 6, Adobe PostScript

,

IBM ProPrinter

 or Epson

 emulations.

The OkiLAN 6010e supports 10-megabit networks and
most popular network operating systems and printers,
except for the OKIPAGE 8w or other GDI-based print-
ers.

The OkiLAN 6010e kit includes the following:

•

OkiLAN 6010e hardware

•

Power adapter with line cord

•

Installation User’s Guide

•

Utilities CD

•

Product registration card

Installing the OkiLAN 6010e

1. Turn off printer power.
2. Attach the OkiLAN 6010e to the centronics connec-

tor on your printer.

Parallel
connector

Summary of Contents for POCKET PRINT 6010E







































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands