Oki OKIFAX 5700, User Manual

Page: 84 / 134

English
6-4 Chapter 6
time period then the documents will be automatically sent if this function
is defaulted to ON, or deleted if the default is set to OFF. Available settings
are ON and OFF. Speed access no. 17.
Instant Dial
In the ON state, the document is scanned into memory and dialling starts
immediately. Although the function relies on memory availability,
connection to the remote location is confirmed and the document is
transmitted faster when memory is available. If it is set to OFF, the
machine first confirms contact with the remote location and then transmits
the document reading from the document tray (without scanning into
memory). Speed access no. 18.
Restrict Access
This function controls whether or not machine operation is restricted or
not. In the ON state, if RESTRICTION ID has been programmed, users
must enter a password before being allowed access to the machine’s
functions. Set to OFF, no password is required even if RESTRICTION ID
has been programmed. Speed access no. 19.
ECM Function
The error correction mode (ECM) function is provided to improve
communications in areas where telephone line conditions are very poor.
Available settings are ON and OFF. Speed access no. 20.
Sender ID (ON/OFF)
This function determines whether the Sender ID is to be printed on the
transmitted fax at the remote site. Available settings are ON and OFF: set
to ON, the ID is included on the fax. Speed access no. 23.
Power Save Mode
When this function is set to ON, the machine will automatically switch to
a low-energy mode after being idle for 10 minutes. Available settings are
ON and OFF. Speed access no. 26.