Oki OKIFAX 5700, User Manual

Page: 22 / 134

English
1-14 Chapter 1
inputting another Speed Dial number (in which the second part of the
number should be entered).
PAUSE key (one-touch key #40): Use this key to enter automatic 3-
second pauses in dialling when programming telephone numbers. For
example, use this key to tell the machine to wait for an outside or
international line to open. (Pauses in a telephone number dialling sequence
are indicated by a “P”.)
Accessing Second Panel of One-Touch Keys (Model B only)
To access the second panel of one-touch keys (41-80) grasp the latch at the
bottom of the keypad and lift up on the main panel, swinging it up and to
the rear. After pressing the desired key(s), close the main panel.
Signal Tones
The machine emits a number of sounds to inform the user of specific
conditions.
Key Select tone — This is a short beep emitted each time a key is pressed.
Error tone — If an inappropriate key is pressed, the machine will emit
three short beeps. If there is a problem with operations during
communication, the machine will emit five long beeps. Press the STOP
key to turn the error tone off, and then print a Message Confirmation
Report to check the source of the problem. To do this, press the COPY key
twice in succession with no documents loaded.
End of Session tone
— At the end of each successful faxing session, the
machine will emit a long beep to confirm that there were no errors or
problems in the communication.
Off-Hook Alarm tone — If the machine is equipped with a telephone
handset, and if the receiver of the handset is left out of the cradle when not
in use, the machine will emit an intermittent warbling sound. To turn off
the sound, return the receiver to its cradle and press the STOP key.