Oki MPS6500b User Manual Download Page 86

Page: 86 / 132

MPS6500b User’s Guide> 86

Comp FLASH Menu

The

Comp Flash Menu

provides access to the compact flash settings.

Use the following procedure to enter the compact flash menu:

Press the

MENU

button on the control panel.

Press the < > button until the text “

Comp Flash Menu

” is

shown on the first line of the display.

Press the < > button to enter the compact flash menu.

Press the

> or < >

buttons to move through the

submenus.

Press the < > button to enter the submenu.

Use the procedures in the following table to perform the Comp Flash
Menu options.

WARNING

All files on the compact flash will be deleted if the Format
Cmp Flash function is selected

Submenus

Procedure for Changing
Setting

Data Security
When set to ON, as data is deleted, the location

where the data was stored, is overwritten by

random data. When set to OFF, the data is

deleted.

Press <

> or < > to toggle

between On or OFF.
Press <SELECT> to save the

selection.

Print
This selection will read the selected file from

Compact Flash and print it as if it were being

received from one of the input ports.

Press <

> or < > to scroll

through the files.
Press <SELECT> to print the file.

Delete
This selection will delete the selected file or

directory from the Compact FLASH. To delete an

entire directory, you must first delete all the

files within that directory.

Press <

> or < > to scroll

through the files.
Press <SELECT> to delete the

file.

Format Cmp FLASH
This selection will reformat the Compact Flash.

Press <SELECT> to reformat the

Compact Flash.

CFlash Summary
This selection will print a page containing

information about the installed compact flash,

including a list of all the current existing files

and directories.

Press <SELECT> to print the

Compact Flash summary.

Summary of Contents for MPS6500b





































































































































Search results

Summary of Contents for MPS6500b

Reviews:

Related manuals for MPS6500b

Brands by name

Popular brands

Oki MPS6500b, User Manual

Search results

Summary of Contents for MPS6500b

Reviews:

Related manuals for MPS6500b

Brands by name

Popular brands