MPS6500b User’s Guide> 105
Duplex
Paper jam detected. Error message displayed for Duplex
Tray.
Duplex Failure
Duplex Unit Failure.
End Job
Confirmation prompt used when CANCEL is pressed.
Engine NV Fail
Error message displayed for Engine NV Failure.
Exit Jam
Paper jam detected
Face Up Failure
Error message displayed for Face-Up tray unit failure.
Fan Failure
Error message displayed for Fan Failure.
File Error
Status display for “File Error xx” (where xx is error code).
File Not Found
Could not find a filter configuration file.
Filter Error
Displayed on line 1, detail of error on line 2.
Firmware Upgrade
Indicates “Firmware Upgrade” mode is active.
Format Error
Failure during attempted format of flash.
Formatting
Status display for file status.
Fuser Failure
Error message for Fuser Failure.
ID Mismatch
Displayed for OEM ID Mismatch on EP Cartridge.
Initializing
Displayed during Power-on Initialization.
Insert Tray
Recovery action displayed when tray needs inserted
Install/Reset
Recovery message displayed for ROS failure.
Load Paper
Un-specific “Load Paper” prompt.
Load Paper Tray 1
A user prompt that paper needs to be put into Tray 1.
Load Paper Tray 2
A user prompt that paper needs to be put into Tray 2.
Load Paper Tray 3
A user prompt that paper needs to be put into Tray 3.
Load Paper Tray 4
A user prompt that paper needs to be put into Tray 4.
Lower Switch
Face Up Tray Failure.
Main Motor Fail
Displayed for Main Motor Failure.
Maintenance Reqd
Used for error/warning when Maintenance is required
(replace fuser/rollers/etc.)
Misfeed Jam
Paper jam detected inside the printer.
Net Comm Error
Error Message used to report Network Interface
Communication Failure.
Message
Condition/Reason/Action
