Oki MPS6500b User Manual Download Page 118

Page: 118 / 132

MPS6500b User’s Guide> 118

Printing Storage Summary

This selection will print a page containing information about the
selected storage device, including a list of all the current existing
files and directories. Use the following procedure to enter the menu:

Press the

MENU

button on the control panel.

Press the < > button until the text “

Disk Menu,

” “Flash

Menu,” or “Comp Flash Menu” is shown on the first line of the
display.

Press the < > button to enter the selected menu.

Press the

> or < >

buttons to move through the submenus

until [XXXX Summary] is displayed (XXXX = Disc, Flash, or
Compact Flash).

Press the <SELECT> button to print the summary.

REPORTS

DESCRIPTION

Storage

Summary

Prints summary information about the storage device

including a list of directories and files.
See:

• “Flash Menu” on page 84

• “Disk Menu” on page 85

• “Comp FLASH Menu” on page 86

Summary of Contents for MPS6500b





































































































































Search results

Summary of Contents for MPS6500b

Reviews:

Related manuals for MPS6500b

Brands by name

Popular brands

Oki MPS6500b, User Manual

Search results

Summary of Contents for MPS6500b

Reviews:

Related manuals for MPS6500b

Brands by name

Popular brands