ML1120
Plus
/ML1190
Plus
User’s Guide - Operating instructions > 54
Menu
IteM
FunctIon
SettIng
Set-up menu
7 or 8 Bits Data
Word
Set the character code
and graphics data units to
7 or 8 bits.
(ML emulation only)
8
7
Operator panel
function
Select full or limited
operation.
Full operation
Limited operation
Reset inhibit
Set whether to enable
or disable an initial
command.
no
Yes
Print suppress
effective
Set whether to enable or
disable a print suppress
setup command.
Yes
No
Auto LF
Select whether to perform
auto LF operation or not
upon receiving a CR code.
Yes
no
Auto CR
Select whether to perform
auto CR operation upon
receiving a carriage return
command.
(IBM emulation only)
Yes
no
Print DEL Code
Set whether 7FH code
is printed with DEL mark
or not.
(ML emulation only)
no
Yes
SI select pitch (10
CPI)
Set how to handle an SI
command received in 10
CPI mode.
(IBM emulation only)
15 CPI
17.1 cPI
SI select Pitch
(12 CPI)
Set how to handle an SI
command received in 12
CPI mode.
(IBM emulation only)
12 cPI
20 CPI
Time out print
Select valid or invalid.
Valid
Invalid
Auto Select
Select whether to
automatically set Select
Mode after paper feeding
or not.
Yes
No
Host Interface
Select interface settings.
auto Interface
Parallel
USB
Serial
