Oki ML1120 Plus Page 45 User Manual Download

Page: 45 / 89

ML1120

Plus

/ML1190

Plus

User’s Guide - Operating instructions > 45

Indicators

IndIcator

StatuS

MeanIng

SEL

Printer is on-line i.e. is available to print

OFF

Printer is off-line i.e. is not available to print

Flashing

• When flashing together with the ALARM

indicator, printing cannot be resumed at

this stage. Turn the power OFF, verify that

the carriage moves properly, then turn the

power ON again.

If the problem is still there after you turn

the power ON again, contact your dealer.

•  Indicates Print Suppress status.
•  Indicates Head Thermal Alarm status.
•  Indicates Power Save mode (long-cycle

flashing)

ALARM

If printing, indicates lack of paper, i.e. no

paper present.

OFF

Paper present status

Flashing

•  Paper jam alarm status
•  Media switch alarm status
•  When flashing together with the SEL

indicator, printing cannot be resumed at

this stage. Turn the power OFF, verify that

the carriage moves properly, then turn the

power ON again.

If the problem is still there after you turn

the power ON again, contact your dealer.

STATUS

OFF

Flashing

Indicates font settings.

: LQ Courier
: LQ Roman
: LQ Swiss
: LQ Swiss Bold
: LQ Orator
: LQ Gothic
: LQ Prestige
: Utility
: HSD

For character pitch setting:

: 10CPI
: 12CPI
: 15CPI
: 17CPI
: 20CPI
: Proportional

Summary of Contents for ML1120 Plus


























































































Search results

Summary of Contents for ML1120 Plus

Reviews:

Related manuals for ML1120 Plus

Brands by name

Popular brands

Oki ML1120 Plus, User Manual

Search results

Summary of Contents for ML1120 Plus

Reviews:

Related manuals for ML1120 Plus

Brands by name

Popular brands