Oki MC561MFP User Manual Download Page 172

Page: 172 / 281

172

–

Paper Jams

MC361/MC561 Basic User’s Guide

Touch any screw

towards the front

inside the machine to

remove static electricity from your body.

Hold the blue handles of the image drum unit (1) with both

hands and lift it out of the machine, then place it on a flat
surface.

WARNING!

If the machine has been turned on, the fuser unit (at the

back) may be hot. This area is clearly labelled. DO NOT

TOUCH IT.

CAUTION!

•

The image drum unit is a static sensitive device and is

very delicate. Handle it carefully.

•

Do not expose the image drum unit to direct sunlight or

very bright interior light (more than approximately 1500

lux).

•

Even under the normal interior light, do not leave it for

more than 5 minutes.

Summary of Contents for MC561MFP


























































































































































































































































































Search results

Summary of Contents for MC561MFP

Reviews:

Related manuals for MC561MFP

Brands by name

Popular brands

Oki MC561MFP, User Manual

Search results

Summary of Contents for MC561MFP

Reviews:

Related manuals for MC561MFP

Brands by name

Popular brands