Oki MC560n User Manual Download Page 77

Page: 77 / 243

Print settings and security > 77

RINTING

THE

DOCUMENT

Your print job is printed using the printer control panel on the
front of the MFP.

When the MFP is idle (“ONLINE” indicated in the display),
use the

buttons to select the PRINT JOB menu, then

press [ENTER].

Select “ENCRYPTED/STORED JOB”.

Use the +/- buttons to input your PIN. Press [ENTER]
after each digit.

If you have more than one stored document, a list appears
in the display.

Use the

buttons to select the name of the print job

you wish to print, and press [ENTER] to select it.

If necessary, use the

buttons to highlight the PRINT

option.

Press [ENTER] to confirm you wish to print the document.

Use the

buttons to select the number of collated

copies you require.

Press [ENTER] to print your document.

The document will not be deleted from the hard disk after it has
been printed.

READY

ATTENTION

ON LINE

CANCEL

BACK

ENTER

NOTE
It is also possible to print and delete stored documents
remotely from your PC using the Storage Device Manager
utility.

Summary of Contents for MC560n




















































































































































































































































Search results

Summary of Contents for MC560n

Reviews:

Related manuals for MC560n

Brands by name

Popular brands

Oki MC560n, User Manual

Search results

Summary of Contents for MC560n

Reviews:

Related manuals for MC560n

Brands by name

Popular brands