Print settings and security > 74
PCL
EMULATION
When you click the
Properties
button from your application’s
Print dialog, the driver window opens to allow you to specify your
printing preferences for this document.
5550 Setup Tab_oda.jpg
1.
Paper size should be the same
as the page size of your
document (unless you wish to
scale the printout to fit
another size), and should also
be the same as the size of
paper you will feed into the
MFP.You can choose the
source of the paper to feed,
which may be Tray 1 (the
standard paper tray), Tray 2
(if you have the optional 2nd
paper tray installed) or the multi purpose feeder. You can
also click on the appropriate part of the screen graphic to
select your preferred tray.
2.
The setting for paper weight should match the type of
paper on which you intend to print.
3.
A variety of document finishing options can be selected,
such as normal one page per sheet, or N-up (where N can
be any number up to 16) for printing scaled down pages
at more than one page per sheet. Booklet printing prints
two pages per sheet on each side of the paper so that
when folded they make up a booklet. Booklet printing
requires the duplex unit to be installed in your MFP.
Poster printing will print large pages as tiles spread over
multiple sheets.
4.
For two-sided printing, you can choose to flip the page by
the long edge or the short edge. Of course, this requires
that a duplex unit be installed in your MFP.
5.
If you have changed some printing preferences before and
saved them as a set, you can recall them to avoid having
to set them individually each time you need them.
6.
A single on-screen button restores the default settings.
