Oki MC560 Plus User Manual Download Page 60

Page: 60 / 239

Configuring your machine > 60

Usage menu

Job log menu

ITEM

DESCRIPTION

Tray n

Page Count

The total number of pages fed from

tray n.

MPT Page Count

The total number of pages fed from the multi purpose

tray.

Color Page Count

The total number of pages printed in color.

Mono Page Count

The total number of pages printed in monochrome.

K Drum Life

Remaining

C Drum Life

Remaining

M Drum Life

Remaining

Y Drum Life

Remaining

Percentage of life remaining in these consumable

items.

Belt Life Remaining

Percentage of belt life remaining.

Fuser Life Remaining

Percentage of fuser life remaining.

K Toner

C Toner

M Toner

Y Toner

Cartridge size and current toner level.

Note

Access to this menu is password restricted.

ITEM

CHOICE

DESCRIPTION

Job Log

ENABLE

DISABLE

Prints a list of jobs carried out on

this MFP.

Summary of Contents for MC560 Plus
















































































































































































































































Search results

Summary of Contents for MC560 Plus

Reviews:

Oki MC560 Plus, User Manual, Page: 60 / 239

Search results

Summary of Contents for MC560 Plus

Reviews: