manualshive.com logo in svg

Oki MC560 Plus, User Manual, Page: 201 / 239

Share
Download
Oki MC560 Plus User Manual Download Page 201

 

A guide to printing > 201

3.

The main screen of Profile Assistant displays the profiles 
resident on the selected MFP’s hard disk. To download a 
new profile to the MFP:

(a)

Click 

Add

.

(b)

Select an ICC profile from your computer's hard 
disk.

(c)

Once you have selected a profile, you can add it to 
the MFP as one of the 4 profile types - RGB Source, 
CMYK Simulation, Printer or Linked.

(d)

The options available will depend on which ICC 
profile you have selected. For example, if you have 
selected a CMYK profile, you may only be able to add 
this to the printer as a CMYK Simulation or Printer 
output profile.

(e)

Select a number from 1 to 12. This number is used 
to identify the profile in the printer driver.   

(f)

Click [OK] to download the ICC profile to the MFP.

S

TEP

 3 - S

ELECT

 ICC 

PROFILES

 

IN

 

THE

 

PRINTER

 

DRIVER

What you select in the printer driver depends on the color 
matching task that you wish to perform.

1

2

Summary of Contents for MC560 Plus
















































































































































































































































Reviews:

No comments