Maintenance > 133
7.
Holding the new fuser by its handle, make sure that it is
the correct way round. The retaining levers (2) should be
fully upright, and the two locating lugs (3) should be
towards you.
Fuser Alone.eps
8.
Lower the fuser into the MFP, locating the two lugs (3) into
their slots in the metal partition which separates the fuser
area from the image drums.
9.
Push the two retaining levers (2) towards the rear of the
MFP to lock the fuser in place.
Fuser Lock.eps
10.
Close the top cover and press down firmly at both sides so
that the cover latches closed.
3
2
2
C
M
Y
K
2
Summary of Contents for MC560 Plus
Page 1: ......