A guide to printing > 225
D
UPLEX
(
DOUBLE
-
SIDED
)
PRINTING
If your MFP has a duplex unit installed you can print on both sides
of the paper, to save paper, weight, bulk and cost.
>
Only paper can be used for duplex printing, not
transparencies or other media.
>
Use paper stock of 20-32 lb. (75–120 g/m²). If you
experience excessive curling with 20-24 lb. (75–90 g/m²)
paper, use 28 lb. (105 g/m²).
>
Use standard sized paper stock only, e.g. A4, A3, Letter,
etc.
>
Load the paper print side up. Ream wrappers are usually
marked with an arrow, indicating which is the print side.
>
Paper can be fed from standard paper trays, including the
high capacity feeder if you have one, but not from the
multipurpose tray.
>
Do not set the paper weight to Ultra Heavy.
>
Do not enable the White Page Skip function.
Windows PostScript
1.
In the driver’s Layout tab, under [2-Sided Printing], select
the binding edge you want.
PS Duplex_oda.jpg
For portrait (tall) page layout the usual choice is [Long
Edge]. For landscape (wide) page layout the usual choice
is [Short Edge]. Choosing [Off] turns off duplex printing
and your document will be printed single-sided.
Summary of Contents for MC560 Plus
Page 1: ......