Oki MB492dn, User Manual

Page: 521 / 1228

Saving Power Consumption with the Power Save Function
The machine has three Power Save modes: Power Save, Sleep, and Deep Sleep.
If you do not use the machine for a certain period of time, the machine automatically enters Power Save mode, saving power
consumption. Alternatively, you can switch the machine to Power Save mode by pressing the (POWER SAVE) button.
The procedures for switching the machine to each mode and conditions to exit each mode are shown in the table below.
Power
Save
mode
Procedure for switching the
machine to each mode
Condition to
switch to
each mode
Machine status Condition to exit each mode
Power
Save
mode
After a certain period of time
passes*
1
, or press the
(POWER SAVE) button
- The backlight on the operator panel turns
off. The (POWER SAVE) button lights
up in green.
Press a button on the operator
panel. Print data, a fax, or other
data is received.
Sleep
mode
After a certain period of time
passes
*2
A certain
function
*3
is
enabled.
The screen on the operator panel turns
off. The (POWER SAVE) button flashes
in green (every 3 seconds).
Press the (POWER SAVE)
button. Print data, a fax, or other
data is received.
Deep
Sleep
mode
After a certain period of time
passes
*2
A certain
function
*3
is
disabled.
The screen on the operator panel turns
off. The (POWER SAVE) button flashes
in green (every 6 seconds).
Same conditions as Sleep mode
are applied or there are
restrictions to exit Deep Sleep
*4
.
*1 If the machine idles for a certain period of time (1 minute by factory default), the machine automatically enters Power Save mode.
To change the time to enter Power Save mode, refer to " Setting Power Save Mode ".
*2
If the machine idles for a certain period of time (30 minutes by factory default) in Power Save mode, the machine automatically
enters Sleep mode or Deep Sleep mode. To change the time to enter Sleep mode or Deep Sleep mode, refer to " Setting Sleep
Mode ".
*3
For details on the applicable function, refer to " Setting Sleep Mode ".
*4
For details on the restrictions, refer to " About Restrictions in Sleep Mode and Deep Sleep Mode ".
Setting Power Save Mode
This section describes how to set Power Save mode.
Setting Sleep Mode
This section describes how to set Sleep mode and exit Sleep mode to the standby status.
About Restrictions in Sleep Mode and Deep Sleep Mode
This section describes about the restrictions that occur to the network when this machine enters Sleep Mode or Deep Sleep Mode.
520