Oki MB492dn, User Manual

Page: 496 / 1228

TWAIN Setup Sets TWAIN.
WSD Scan Setup Sets WSD Scan.
PC Scan Mode Sets PC Scan mode.
Print From USB Memory Setup
Set Print From USB Memory.
Print Setup
Item Description
Print
Menu
Print Setup Sets the number of copies, resolution, and other settings. When using the printer driver, the values that
are set with the printer driver are given priority over these settings.
Printer
Adjust
Sets manual timeout, jam recovery, and other print adjustment settings.
Print
Position
Adjust
Adjusts front X, front Y, back X and back Y positions.
Drum
Cleaning
Sets cleaning of an image drum.
Hex Dump Displays all the received print data in hex. To exit this mode, restart the machine.
System Configuration
Menu
Sets operation modes, alarm release, and other machine operation settings for each situation.
Emulation PCL Setup Sets PCL.
PS Setup Sets PS.
XPS Setup Sets XPS.
IBM PPR
Setup
Sets IBM PPR Setup.
EPSON FX
Setup
Sets EPSON FX Setup.
Management
You can set local interface, system settings, power save mode, memory setting, change password, default value reset, or other device
settings.
Item Description
Local Interface USB Menu Sets USB.
System Setup
Sets access control, display units, and other settings.
Power Save Sets power save settings.
Memory Setup Sets the reception buffer size and resource save area.
Admin Password Sets an administrator password.
Reset Settings Initializes all the data that is set in "Management", including speed dial, copy and fax function settings.
User Install
Item Description
Power Setup Sets Auto power off and Power supply Return.
Fax Setup Sets a fax line, sender, and other settings.
Time Setup Sets the time to the machine.
Note
If you select [Auto], you cannot set the time from the operator panel.
Other Settings Sets High humid mode and Quiet mode.
Job List
495