Oki MB492dn, User Manual

Page: 500 / 1228

About Paper Types That Can be Loaded and Storage Methods
Available paper types
To perform high-quality printing, be sure to use the supported paper types that satisfy requirements, such as material, weight, or
paper surface finishing. Use digital photo print paper.
If you print on paper that is not recommended by Oki Data, check the print quality and the movement of the paper thoroughly in
advance to ensure that there are no problems.
Paper
type
Paper type and paper size (mm) (The value
enclosed with brackets is indicated in inches.)
Paper weight
Plain
paper
A4 210 x 297 60 to 163 g/m
2
(16 to 43 lb)
For duplex printing, 60 to 120 g/m
2
(16 to 32 lb)
Note
If the paper size is set to A6, A5, or the paper width is
148 mm (A5 width) or smaller, printing becomes slow.
A5 148 x 210
A6 105 x 148
B5 182 x 257
Letter 215.9 x 279.4 (8.5 x 11)
Legal 13 215.9 x 330.2 (8.5 x 13)
Legal 13.5 215.9 x 342.9 (8.5 x 13.5)
Legal 14 215.9 x 355.6 (8.5 x 14)
Executive 184.2 x 266.7 (7.25 x 10.5)
Statement (5.5 x 8.5)
16K (184 x 260 mm) 184 x 260
16K (195 x 270 mm) 195 x 270
16K (197 x 273 mm) 197 x 273
4x6inch (4 x 6)
5x7inch (5 x 7)
Custom Width: 86 to 216
Length: 140 to 1321 60 to 163 g/m
2
(16 to 43 lb)
Banner 210 x 900 mm 210 x 900
Banner 215 x 900 mm 215 x 900
Banner 215 x 1200 mm 215 x 1200
Envelope Monarch 98.4 x 190.5 (3.875 x 7.5) Envelopes must be made of paper of 85 g/m
2
(24 lb), and
their flaps must be folded.
Com-9 98.4 x 225.4 (3.875 x 8.875)
Com-10 104.8 x 241.3 (4.125 x 9.5)
DL 110 x 220 (4.33 x 8.66)
C5 162 x 229 (6.4 x 9)
C6 114 x 162 (4.49 x 6.38)
Label A4 210 x 297 0.1 to 0.2 mm
Letter 215.9 x 279.4 (8.5 x 11)
Partly-
printing
paper
Subject to plain paper 60 to 163 g/m
2
(16 to 43 lb)
Color
paper
Subject to plain paper 60 to 163 g/m
2
(16 to 43 lb)
Recommended paper
The machine supports a variety of print media, including a range of paper weights and sizes. This section describes how to choose
and use media. To obtain the best performance, use 75 to 90 g/m
2
plain paper that is designed for use in copiers and laser printers.
Use of heavily embossed or very rough textured paper is not recommended. Pre-printed stationery can be used, but the ink must not
offset when exposed to the high fuser temperatures used in the printing process.
Envelopes
Envelopes must be free from twists, curls or other deformations. The envelopes must also be of the rectangular flap type, with
glue that remains intact when subjected to hot roll pressure fusing in the machine. Window envelopes are not suitable.
499