40
LP-1030-MF User's Manual for Multifunction Printer Operation
Partial Copying
With this function, the Printer copies an original partially.
Paper feed
direction
Distance from original's front end
Partial copy start position
Partial copy
length
Seiko I Infotech Inc. Design department
Tanaka
Shimano
Ioka
Oyama
123456789
XXXXXXXXXXXXXXXXXXXX
XXXXXXXXX
123456789
A4 long
APPROVED BY
SCALE
1/1
UNIT
1/1
CHECKED BY
SIGNED BY
DRAWN BY
DRAWING NO.
PART NO.
TITLE
MODEL
SHEET
PAGE
A
1
2
3
4
B
C
D
A
B
C
D
E
E
K
K
50.0
100.0
4-R2.0
B
C
D
B
C
D
E
E
K
K
50.0
100.0
4-R2.0
TIP
You may need many test copies to check the optimal density and
image quality for an original. In such cases, this function is useful for
copying only a part of the original and checking the results. The larger
the original, the more useful is this function.
To simplify the test copy operation, you are recommended to decide a
setting range for the test copy and register it in the memory. Then you
can check the test copy only by loading the memory.
(
&
Note
When this function is selected,
- The original size setting is disabled. The Printer scans the original,
synchronizing with the original size.
- The frame erase setting is disabled.
- The Printer outputs the original normally from the printer front side.
Note that the Printer outputs the original from the rear side only when
the distance specified below exceeds 1219.2mm (48 inches).
From: Original's front end
To: Partial copy's rear end
When the partial copy length is set to 0, the partial copy function is disabled,
and the Printer issues a normal copy print.
