118
LP-1030-MF User's Manual for Multifunction Printer Operation
Cannot Copy or Scan as Expected
Q.
Cannot copy or scan because the original is jammed.
A.
Originals with folds or a significant curl may cause a paper jam.
Try changing the loading direction of the original.
Try scanning or copying with a carrier sheet.
Q.
The Printer does not detect the roll width or original width properly.
A.
At Available Size Standards of the system menu, set the size standard
settings you do not use to Off.
Automatic detection may be performed properly when the size standard
settings you do not use to Off at Available Size Standards of the system
menu.
Some improper automatic detections are corrected when the number of
the available size standards is reduced.
A.
Change the settings of Original Size Standard and Roll Size Standard from
Auto to the size standard or roll size standard applied to the original.
Some combinations of the original and roll paper may deactivate the
Printer's automatic detection.
Some combinations of the original and roll paper may deactivate the
Printer's automatic detection.
Q.
In the original's horizontal direction, a blank space is added to the copy
printout; or The right and left edges of the original do not appear on the
copy printout; or The size standard of the roll on which the Printer prints is
different from the original's one, when the paper is selected and supplied
automatically by the Printer.
A.
For the original and the printed paper, the size standards are not specified
correctly.
For copying, the size standards for the original and printed paper must be
specified.
