23
LP-1030-MF User's Manual for Multifunction Printer Operation
2
Load the original.
Position the original facing down. Set it in the
Printer aligned with the original width guide.
The inserted original is automatically pulled
into the Printer, and set.
TIP
Position the original touching the front roller, and keep it slack. This
ensures the original is inserted straight.
When scanning a long original, roll the original in your hands, and then
set it. This makes it easier to scan the original straight.
Note
The Printer can output the original either to the front or the rear. When
outputting from the front, to prevent the original from being damaged,
keep the original width guide out of the way at both ends.
In this Printer, the original is set in the center. Even when the original is not
a standard size, set it in the middle.
When the Printer is set to output the original from the front, set the original
by aligning it with a size line.
When using a carrier sheet, do not set the Printer to output the original
from the front. The carrier may catch, resulting in damage to the original.
