110
LP-1030-MF User's Manual for Multifunction Printer Operation
Checking Operating Status with Message
During the scan operation, you can check the operating statuses with the message
on the screen as follows.
(1) Waiting for Scan Request
Press SCAN to show the screen below. This screen shows that the Printer is waiting
for the request from the exclusive application (TerioStation) on the computer
connected to the same network.
A message, Waiting for Scan Request appears on the screen.
(2) Scanning from the Exclusive Application (TerioStation)
At the Scan or Scan & Copy tab of the exclusive application (TerioStation),
configure the parameters and then press Scan.
The ScanDriver appears. Configure the settings and press the Scan button.
Note
For the configuration method for the parameters of TerioStation, see the
TerioStation User's Manual
.
