- 5 -
1. SCOPE
This specification applies to the Zebra converter for use with the LE840/LE850 series, general-purpose
thermal label printers.
2. GENERAL DESCRIPTION
This specification describes the operational procedures of the Z-MODE which converts the Zebra
Programming Language
®
(ZPL II
®
) to the TPCL command to perform printing.
LAN, USB, serial, and parallel interfaces are supported.
The following cases may occur:
(1) Print result is not exactly the same as when printed with Zebra printers.
(2) Print position and font size are slightly different.
(3) Guaranteed print throughput is not achieved.
(4) Oki Data’s printer specifications apply, for example memory capacity and the number of fields.
(5) Some Zebra commands are not supported.
(6) If the print start position of an object is placed within the print area but the end position is outside the
print area, the part beyond the print area will be printed starting on the left end of a new line.
* The BCI (Basic Interpreter)program is the BASIC program which works with the BASIC interpreter
embedded in the Oki Data printers.
