Oki LE850 Technical Reference Download Page 2

Page: 2 / 180

Trademark Acknowledgements

Microsoft and Windows are trademarks of Microsoft Corp.

Zebra, ZPL II, ZebraNET are registered trademarks of Zebra Technologies Corp.

TrueType is a registered trademark of Apple Computer, Inc.

All other company or product names are registered trademarks or trademarks of their respective companies.

Each company’s registered trademarks and trademarks are not marked with

Notice

In the case you use the Z-MODE in a Oki Label printer together with Zebra’s software (including the printer

driver), if such software license is granted on the condition that the software is used in combination with a

Zebra printer, you may violate the software license agreement.

Summary of Contents for LE850





















































































































































































Search results

Summary of Contents for LE850

Reviews:

Related manuals for LE850

Brands by name

Popular brands

Oki LE850, Technical Reference

Search results

Summary of Contents for LE850

Reviews:

Related manuals for LE850

Brands by name

Popular brands