Oki ES9160 MFP/ES9170 MFPES9460 MFP, Scanning Manual

Page: 88 / 116

4 USING TEMPLATES
86 Using Scan Templates
14
If the screen below appears, place another original on the original glass and press
[SCAN] or the [START] button to continue scanning. To finish the job, press [JOB
FINISH], followed by the [FUNCTION CLEAR] button.

The above screen is not displayed under the following conditions:
-
You scan the original from the Reversing Automatic Document Feeder
*
without pressing [CONTINUE] to
scan additional originals.
- A scan preview is displayed.
 To cancel the operation, press [JOB CANCEL].
 To change the scan settings, press [SCAN SETTING].
 P.40 “Changing Scan Settings”
* The Reversing Automatic Document Feeder is optional.

When the equipment has scanned more than 1000 pages in a job, the “The number of originals exceeds the
limits. Will you save stored originals?” message appears. If you want to save the scans, press [YES].

When the temporary workspace is full on the equipment’s hard disk, a message appears and the job is
canceled. The available workspace can be viewed on the TopAccess [Device] tab.

If the number of jobs waiting to store scans in the equipment’s hard disk exceeds 20, a message appears to
indicate that the equipment’s memory is full. In this case, wait a while until memory becomes available
again or delete unnecessary jobs from [JOB STATUS].
 P.37 “Viewing the scan job status”