Network configuration > 12
Network configuration > 9
If you do not wish to launch or install the Network Card Setup utility, you can access the
printer’s Web Page directly through a web browser.
If the printer is connected to the network using TCP/IP, its settings and the printer menu
settings can be configured using a Web browser. Refer
“Adjusting printer settings” on
and the relevant manuals for details of how to launch and use the browser. Refer
for instructions on how to prevent your browser caching
the printer’s web pages.
To apply configuration changes using a Web browser, you will be prompted for a username
and password. The username is
root
and the default password is
aaaaaa
.
The root password can be changed to allow you to configure the printer by using a Web
browser/TELNET/AdminManager. To change password from the Web browser, select
admin.setup.>.Management.>.admin.Password
and follow on-screen instructions.
The network addresses used in this manual are shown as examples only. Network
addresses used in your installation must be generated from your own network.
1.
Launch the Web browser and enter the IP Address of the network interface card in
Address (Location/Position) and press the Enter key.
The Web Page is displayed.
You can find the IP Address on the Self-Diagnostic Test printout, refer to
2.
To access and adjust control settings, such as printer, scanner, fax network, security
and maintenance, click the
administrator.login
button in the left-hand pane.
3.
Enter the username,
“root”
and password as
aaaaaa
.
4.
As this is the first time logging into the printer Web Page, the Printer Identification
(basic setup) page is launched. You have two options:
>
You can enter the printer location, asset number, administrator name and select
“
do.not.show.this.page.again
”. Click
ok
to save these details. Allow a few
seconds for the settings to save and the printer to restart automatically.
>
If you do not wish to enter any details, click
skIP
.
NOTE
To apply configuration changes using AdminManager, the username is
root
and the default password is the last six characters of the Ethernet (MAC)
address (any alpha characters must be in upper case).
NOTE
On the web page you can view printer status, job lists and links. You can also
configure the IP Address, Subnet Mask and Gateway for the network card.
However, to configure printer settings, you need to log in as “root” and enter
the correct password to be able to configure all items.
U
sIng.a.web.browser
d
efaUlt.User.naMe.and.Password
a
djUstIng.PrInter.settIngs
