Network configuration >
Network configuration > 7
With the machine power switched on, press the push-button located on the network
interface panel (at the rear of the machine) for more than three seconds and release. The
self-diagnostic test results and configuration settings are printed.
On the first page of the Network Information that is printed out, under the heading “General
Information” the MAC or Ethernet address is given. For example:
MAC ADDRESS 00808784E3F1
The Ethernet address is therefore: 00:80:87:84:E:F1
NOTE
Not all utilities, features or protocols are supported by every operating
system. Please check with your User’s Guide and support website for latest
information.
IteM
sPecIfIcatIon
Frame Types
IEEE 80.
IEEE 80.
Ethernet-II, SNAP, AUTO
Network Interface
100BASE-TX
10BASE-T
Network Protocols
TCP/IP V4, V6
IEEE 80.1x
Network layer: ARP, IP, ICMP
Session layer: TCP, UDP
Application layer:LPR, FTP, TELNET, HTTP,
IPP, BOOTP, DHCP, SNMP, DNS, SMTP, POP,
SLP, Bonjour
IPX/SPX (NetWare)
Remote printer mode (up to eight file servers
and queues)
Print server mode over IPX/SPX (up to eight
print servers)
Encrypted password supported in print server
mode
EtherTalk
NetBEUI
NetBIOS, WINS
LDAP
Kerberos
Windows Rally
SSL/TLS
IPSec
Functions
Self-diagnostic test printing
Monitoring and configuration by Web browser
Printer status notification by E-Mail
s
PecIfIcatIon
s
elf-dIagnostIc.test