2
2-22
Colour Calibration
8.
Click Measure.
In the dialog box that
appears, follow the
directions for feeding the
measurement page through
the X-Rite DTP32.
The Status field displays
instructions for selecting the
port and feeding the
measurement page through
the DTP32 four times, once
for each colour strip.
9.
When the Status field indicates that the measurements were read successfully, click
Accept.
10.
Click OK in the Measure dialog box.
11.
Click Apply in the Calibrator window to implement the new calibration set.
12.
Click OK in the Information dialog box.
This completes the Fiery calibration process.
Using AutoCal and ColorCal
AutoCal and ColorCal allow you to calibrate the Fiery without the use of an additional
spectrophotometer or densitometer. Instead, these methods use the ES3640e MFP’s
built-in scanner to measure toner density values. Using either AutoCal or ColorCal
provides an equally accurate calibration of the Fiery.
AutoCal and ColorCal have the following differences:
• Scanner calibration—ColorCal lets you calibrate the scanner using the Kodak Color
and Gray Scale strips. AutoCal lets you calibrate the Fiery using the Kodak Gray
Scale strip; scanner calibration is not available.
• Measurement page—For ColorCal, square black-and-white and colour patches are
randomly printed on the ColorCal Measurement Page. This allows ColorCal to be
less influenced by copier conditions, providing greater accuracy in colour
reproduction and calibration.
