1
1-3
Managing colour on the ES3640e MFP
You can specify settings for the following options by selecting print options when you
send a job to the ES3640e MFP. Some can also be set as defaults by the administrator
during Setup or using ColorWise Pro Tools. Settings specified using print options
override the defaults. .
Fiery colour print option
What it does
Brightness
85% Lightest to 115% Darkest
Performs a colour adjustment on all
colour channels
to make the printed
output lighter or darker.
CMYK Simulation Method
Quick/Full (Source GCR)/Full (Output
GCR)
(Default set at Setup or with ColorWise Pro
Tools)
Quick simulation applies one-dimensional transfer curves that adjust output
density only. The Full simulations apply colorimetric transformations that
adjust hue as well as output density (see
).
CMYK Simulation Profile
SWOP-Coated (EFI)/DIC (EFI)/
Euroscale (EFI)/Match Copy/None
(Default set at Setup or in ColorWise Pro
Tools)
Adjusts CMYK colour data to simulate an offset press standard or a custom
colour
gamut
defined at your site. The Match Copy setting bypasses
calibration to match a copy made from the ES3640e MFP copier glass.
Choosing None bypasses simulation (see
Color Mode (Mac OS)
CMYK/Grayscale
or
Print Mode (Windows)
Standard Colour/Expert Colour/Grayscale
Specifies the output colour space of the job. Select CMYK, Standard Colour,
or Expert Colour for a full-colour document.
(Other) Gamma
1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.4/2.6/2.8/3.0
(Default set with ColorWise Pro Tools)
Applies the specified
gamma
value to the RGB source space definition (see
). To use this print option, you must choose Other as the RGB Source
Profile setting.
(Other) White Point
5000 K (D50)/5500 K/6500 K (D65)/
7500 K/9300 K
(Default set with ColorWise Pro Tools)
Applies the specified
white point
value to the RGB source colour space
). To use this print option, you must choose Other as
the RGB Source Profile setting.
(Other) Phosphors
Hitachi EBU/Hitachi-Ikegami/NTSC/
Radius Pivot/SMPTE/Trinitron
(Default set with ColorWise Pro Tools)
Applies the specified
phosphor
(monitor type) information to the RGB source
space definition (see
). To use this print option, you must choose
Other as the RGB Source Profile setting.
Output Profile
Output1-10
(Default set at Setup or with ColorWise Pro
Tools)
The
output profile
is applied to all data in the print job (see
). User-
defined output profiles can be downloaded to the ES3640e MFP using
ColorWise Pro Tools. For more information about using ColorWise Pro Tools,
see
.
