manualshive.com logo in svg

Oki C911dn, User Manual

Share
Download
Oki C911dn User Manual Download Page 200

- 200 -

Macintosh utilities

4

5

1

3

2

Con

ven

ient print 

functions

Appendix

Index

Checking a

nd 

 

Cha

nging Printer  

Settings Using 

 

the Control P

anel

Network 

Setup

Matching 

Colors

Using Utilit

y 

Softw

are

Deleting user IDs and user 

names

1 

Start Print Job Accounting.

Reference

 

z

See “Installing” (P.198)

.

2 

Select the user to be deleted, and click 

[Delete].

Memo

 

z

If deleting all registered users, click [Delete All].

3 

Click [Save].

4 

Close the client software.

Network Card Setup Utility

The network can be set using the Network Card 

Setup Utility.

TCP/IP must be enabled to use the Network Card 

Setup Utility. 

Note

 

z

Set the TCP/IP.

Setting IP addresses

1 

Start the Network Card Setup Utility.

Reference

 

z

See “Installing utilities” (P.170)

.

2 

Select the device.

3 

Select [IP Address Setup] from the 

[Setup] menu.

4 

Specify the settings as necessary, and 

click [Setup].

5 

Enter the password, and click [OK].

 

– The factory-set password is the last 

six alphanumeric characters of the Mac 

address.

 

– The password is case-sensitive.

6 

Click [OK] to enable the new settings.

The device network card will restart.

Summary of Contents for C911dn

































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands