![background image](http://html1.mh-extra.com/html/oki/c910/c910_service-training_4104261042.webp)
27. Removing the High
Voltage Power Supply
(HVPS).
27.1. Remove
two
screws and
release three tabs
along the back of
the HVPS cover.
Remove the HVPS
cover.
NOTE: When reinstalling the
HVPS cover insure that all 3
tabs are snapped under the
chassis plate. Failure to do
this may cause transfer
voltage problems resulting in
washed out images.
27.2. Remove
two
screws and unplug
four connectors.
Gently slide the
HVPS toward the
rear of the unit
until it clears the
contacts and lift
the board out.
38