![background image](http://html1.mh-extra.com/html/oki/c910/c910_service-training_4104261025.webp)
21
19. Removing the Eject-Assy.
(Exit Guide)
19.1. Release the five
tabs with a flat
blade screwdriver
– the two tabs on
the end of the
cover first – and
reach under the
area marked with
the Red arrow and
press to release
latches. Gently
pivot the cover up
to remove.
NOTE
: Do Not Pull cover
outlined in the Yellow oval
area! Damage is sure to
occur if you do!
19.2. Unplug
connector
at upper right of
the OR-S2R (exit
sensor board).