![background image](http://html1.mh-extra.com/html/oki/c910/c910_service-training_4104261031.webp)
21.3. Remove
eight
screws – seven
inside the printer
(arrows) and one
on the front
(circled).
NOTE
: During reassembly,
don’t forget to reinstall the
screw through the front of the
chassis – it’s a step many
technicians forget!
21.4. A flat blade
screwdriver may
be required to pry
the side plate
away from the
frame at the front
of the printer.
Once done, lift the
Sensor-
Registration Assy.
up to remove and
while doing so,
unplug the two
connectors as
shown.
27