Oki C3200n, User Manual

Page: 115 / 168

C3200n User’s Guide
Troubleshooting • 115
Paper Size Change Request __________
Printer does not go online ___________
Printer makes a strange noise ________
Printer takes a long time to start printing
Possible cause Remedy
Paper loaded in tray is
different size from
that formatted in
software application. Either change paper in tray to match size
formatted in application and press ON-LINE to
continue, or continue printing on existing paper
by pressing ON-LINE.
Possible cause Remedy
Bad connection Switch off the printer and disconnect the power
cable. Reconnect the power cable and switch
the printer on. If this does not clear the fault,
call for service.
Possible cause Remedy
The printer is not
horizontal. Place the printer on a stable, level surface.
There are scraps of
paper or other foreign
matter inside the printer. Check the inside of the printer and remove
any such objects.
The top cover is not
firmly shut. Press the left and right sides of the top cover.
Possible cause Remedy
The printer has to
warm up returning
from power save mode. In the printer menu settings, set power save to
a higher value to increase the length of time
before entering power save mode (SYS CONFIG
MENU
→
POW SAVE TIME).