Oki C3200n User Manual Download

Page: 112 / 168

C3200n User’s Guide

Troubleshooting • 112

USB Problems _____________________

Cannot configure for USB connection

NOTE

Windows NT 4.0 does not support USB. Windows

98 upgraded from Windows 95 may not support

USB.

Possible cause

Remedy

USB cable does not meet
specifications.

Use USB cable to specification Ver.1.1.

Interface is disabled.

Check that USB interface is set to Enable in
the menu (USB MENU

→

USB

→

ENABLE).

Configuration procedure
was not correctly
followed or cancelled.

Configure again from the beginning.

USB cable is
disconnected or faulty.

Reconnect or try another cable.

A USB hub is being used. The printer cannot be used with a USB hub.

Connect the printer and computer directly.

The USB cable is
installed in the Ethernet
port.

Make sure the USB cable is plugged into the
black USB port (1) on the printer:

c52_usb_2_crop.jpg

Summary of Contents for C3200n









































































































































































Search results

Summary of Contents for C3200n

Reviews:

Related manuals for C3200n

Brands by name

Popular brands

Oki C3200n, User Manual

Search results

Summary of Contents for C3200n

Reviews:

Related manuals for C3200n

Brands by name

Popular brands