Oilon ECO Inverter+ 25, Installation And Commissioning Manual

Page: 8 / 58

Transportation
Transport the unit upright and protected against water and dust. Do not stack goods
on the unit. Use only safe lifting and handling methods when moving or lifting the
unit. After lifting, lower the unit carefully down onto the floor. Hard impacts can cause
equipment damage.
The compressor unit can be tilted up to 45 degrees from horizontal.
If the unit is tilted beyond 45 degrees, the compressor may not receive proper
lubrication at startup. As a result, the compressor may become damaged.
● If the unit has been accidentally tilted beyond 45 degrees, leave the unit in vertical
position for at least three hours before starting the compressor.
1.5 Scope of delivery
Equipment and components
Item PCS Oilon
designation
Wireless touch screen
● For using the EasyAce control
app to control the heat pump’s
automation system
1 378810400
Wireless touch screen ver. 1
Outdoor temperature sensor
● Sensor ID is TE0.
● Connect the sensor to the
cable TE0–W1.
1 36217543
Outdoor temperature sensor ver. 1
Condenser pump 1 34023129 Grundfos UPMXL GEO 25-125 180 PWM
Evaporator pump 1 34023075 Wilo-Stratos PARA 25/1-12 T16 180 mm 6h
Buffer tank temperature sensor 1
DHW storage tank temperature 1
Heating circuit 1 flow temperature
sensor
1
Connected to the heat pump’s control
cabinet, cable length approximately 4 m.
Torx T25 key
● Provided for opening the
device’s Torx T25 screws.
1 34798044
Torx T25 ver. 1
6 (54) M8003 2219EN