Oilon ECO Inverter+ 25, Installation And Commissioning Manual

Page: 14 / 58

Floor drain
The unit’s installation site must have a floor drain. The site’s floor should be inclined so
that any runoff from the unit leads towards the drain.
2.2 Dimensions, connections, and components
Components, ECO I
ECO I main patrs ver. 2
Pos. Item Description
Brine circuit side (evaporator) In from the top, out from the bottom.
Heating side (condenser) In from the bottom, out from the top.
WI Heating water in (condenser in) 1 1/4" outer thread
WO Heating water out (condenser out) 1 1/4" outer thread
BI brine circuit in (evaporator in) 1 1/4" outer thread
BO brine circuit out (evaporator out) 1 1/4" outer thread
AF Leveling feet M10, DIN/ISO 17/16 mm
TC Switchboard cover (Torx T25) The unit’s fuses and some of its terminal
blocks are located under this cover.
FC Compressor unit front panel (Torx T25) The unit’s switchboard is located behind this
cover.
HUB EasyAce data hub Behind a transparent panel (Torx T25)
12 (54) M8003 2219EN