- 20 -
8-1. How to Replace and Adjust the Brush
If the ends of the brush are worn and do not wipe-off the screws that are out of
alignment, replace the brush.
Optional hard brushes are also available. Contact the dealer from which you
purchased the machine for further information.
● Turn the machine on and off until the brush comes out to a position where
you can remove the brush fixing screws. (See Picture 21)
● Refer to the diagram under Picture 21 to replace the brush.
● Reverse the procedure for removing the brush to attach a new one.
● Refer to Page 8 “Brush Height Adjustment” for adjustment.
Brush Item Nos.:
NSN02107 (for Model SS-12)
NSN22001 (for Model SS-23; option for Model SS-12)
Fixing screws
Picture 21
8. Parts Replacement and Adjustment
The brush, driving belt, and driving motor are all consumable parts.
You will need to order another rail if the size of the screw you are using is to be changed.
Read the instructions below thoroughly before adjustment. Be sure to remove all screws from inside the machine before
replacement.
Turn off the machine before replacing or adjusting parts.
