- 16 -
*** Stopper Sensor Adjustment (Pin 5) ***
The stopper sensor detects stopper movement.
Loosen the stopper sensor bracket fixing screws (2 pcs) and adjust the light receiving
sensor position horizontally. (See Picture 19)
4.0V or more: Stopper ON
0.2V or less: Stopper OFF
If the voltage is 2.5V or over, the sensor judges that there are screws on the rail.
*** Front Sensor Adjustment (Pin 7) ***
The front sensor detects whether or not there are any screws remaining on the
stopper.
Loosen the front sensor bracket fixing screws (2 pcs) and adjust the light receiving
sensor position vertically. (See Picture 20)
0.25 – 1.5V: There are no screws on the stopper.
3.5V or more: There are screws on the stopper.
If the voltage is 2.5V or over, the sensor judges that there are screws remaining on
the stopper.
After checking and adjusting each part, test run the machine using the screws you
actually intend to use.
If the machine does not run properly, repeat the above adjustment as well as rail
position and
vibration adjustments. After the test run, return the sensor wiring to its original
condition.
Do not pinch the wiring and ensure it is clear of the machine’s moving parts.
ＯＮ
ＯＦＦ
Stopper
Picture 19
Fixing screws
Bracket fixing
screws
Picture 20
Stopper sensor
bracket
Front sensor
